Technical reports
Periphery:DI 16xDC 24V, thereof counter 2x32Bit (AB), up to 30kHz, DIO 4xDC 24V (DO 0,5A), DO 4xDC 24V, 0,5A, thereof 2xPWM, 50kHz, potential...
Booth 1C301
You, as a customer of VIPA control technology, need to have your machine conform to the new machinery directive at the latest by 29.12.2009. In...
From the second step of product development VIPA offers, besides the proven, comprehensive and efficient standard control technology, also high-end...
In an initial product development step VIPA will offer safe input and output modules for PROFIsafe with Certification to SIL 3 and PL e in the SLIO...
As a rule manufacturers of standard components will issue EC declarations of conformity according to the low voltage and EMC directives. The...
In principle it is not possible to use standard technology in the safety functions of machines, because the safety parameters for determining the...
The required SIL or PL arises from the risk assessment. The intended safety functions must be designed for this level of safety.
Within the scope of the risk assessment, which is required by the machinery directive, a risk analysis must be implemented for a machine, (see 4.)....
For all values statistical sizes are involved that indicate a mean period.
In the IEC 61508 and EN 62061 the following safety parameters are available for safety equipment and safety features:
First, the differences in the legislative history: The EN 62061 based on the basic standard IEC 61508, the application-oriented implementation for...
The most important main standards for machine safety:
Basically there are two main changes for the machine builders that directly affect the safety technology:
The objective in revising the existing machinery directive 98/37/EC was an upgrade in clarifications and an increase of practical applicability.
Spare parts that do not change the function of the machine do not cause the machine to be affected by the new Machinery Directive.
The new Machinery Directive 2006/42/EC has applied from 29.12.2009 and relates to the manufacturer, (re) seller and importer who brings the machine...
Starting immediately, VIPA Touch Panels are available with 800MHz processor together with the pre-installed software HMI SCADA InTouch Compact Edition...
During the SPS/IPC/Drives 2009 VIPA GmbH will first introduce a combined analog in- and output module for system 300S.
Page 25 de 64.