-
100V
134-4EE00 - Signal modules analog | Analog in/output modules
Order no. |
134-4EE00 |
| Type | EM 134 |
General information |
|
| Note | - |
| Features | 3x AI / 1x AI Pt, Ni, R 2x AO 12 Bit Voltage +/- 10 V, 1...5 V, 0…10 V Current +/-20 mA, 0/4…20 mA Resistance-/ temperature measurement Parameterizable |
Current consumption/power loss | |
| Current consumption from backplane bus | 70 mA |
| Power loss | 2 W |
Technical data analog inputs |
|
| Number of inputs | 4 |
| Cable length, shielded | - |
| Rated load voltage | DC 24 V |
| Reverse polarity protection of rated load voltage |  |
| Current consumption from load voltage L+ (without load) | 55 mA |
| Voltage inputs | |
| Min. input resistance (voltage range) | 120 kΩ |
| Input voltage ranges | +1 V ... +5 V 0 V ... +10 V -10 V ... +10 V |
| Operational limit of voltage ranges | +/-0.3% ... +/-0.7% |
| Operational limit of voltage ranges with SFU | - |
| Basic error limit voltage ranges | +/-0.2% ... +/-0.5% |
| Basic error limit voltage ranges with SFU | - |
| Destruction limit voltage | max. 30V |
| Current inputs | |
| Max. input resistance (current range) | 110 Ω |
| Input current ranges | +4 mA ... +20 mA -20 mA ... +20 mA 0 mA ... +20 mA |
| Operational limit of current ranges | +/-0.3% ... +/-0.8% |
| Operational limit of current ranges with SFU | - |
| Basic error limit current ranges | +/-0.2% ... +/-0.5% |
| Radical error limit current ranges with SFU | - |
| Destruction limit current inputs (electrical current) | max. 50mA |
| Destruction limit current inputs (voltage) | max. 24V |
| Resistance inputs | |
| Resistance ranges | 0 ... 600 Ohm 0 ... 3000 Ohm |
| Operational limit of resistor ranges | +/-0.4% |
| Operational limit of resistor ranges with SFU | - |
| Basic error limit | +/-0.2% |
| Basic error limit with SFU | - |
| Destruction limit resistance inputs | max. 30V |
| Resistance thermometer inputs | |
| Resistance thermometer ranges | Pt100 Pt1000 Ni100 Ni1000 |
| Operational limit of resistance thermometer ranges | +/-0.6% ... +/-1.0% |
| Operational limit of resistance thermometer ranges with SFU | - |
| Basic error limit thermoresistor ranges | +/-0.4% ... +/-0.5% |
| Basic error limit thermoresistor ranges with SFU | - |
| Destruction limit resistance thermometer inputs | max. 30V |
| Thermocouple inputs | - |
| Thermocouple ranges | - |
| Operational limit of thermocouple ranges | - |
| Operational limit of thermocouple ranges with SFU | - |
| Basic error limit thermoelement ranges | - |
| Basic error limit thermoelement ranges with SFU | - |
| Destruction limit thermocouple inputs | - |
| Programmable temperature compensation | - |
| External temperature compensation | - |
| Internal temperature compensation | - |
| Temperature error internal compensation | - |
| Technical unit of temperature measurement | °C |
| Resolution in bit | 12 |
| Measurement principle | successive approximation |
| Basic conversion time | 3.2 ms / channel |
| Noise suppression for frequency | 50 Hz, 60 Hz, 400 Hz |
| Initial data size | 8 Byte |
Technical data analog outputs |
|
| Number of outputs | 2 |
| Cable length, shielded | - |
| Rated load voltage | DC 24 V |
| Reverse polarity protection of rated load voltage | |
| Current consumption from load voltage L+ (without load) | 55 mA |
| Voltage output short-circuit protection | |
| Voltage outputs | |
| Min. load resistance (voltage range) | 1 kΩ |
| Max. capacitive load (current range) | 1 µF |
| Max. inductive load (current range) | 30 mA |
| Output voltage ranges | -10 V ... +10 V +1 V ... +5 V 0 V ... +10 V |
| Operational limit of voltage ranges | +/-0.4% ... +/-0.8% |
| Basic error limit voltage ranges | +/-0.2% ... +/-0.4% |
| Destruction limit against external applied voltage | max. 16V (30V / 10s) |
| Current outputs | |
| Max. in load resistance (current range) | 500 Ω |
| Max. inductive load (current range) | 10 mH |
| Typ. open circuit voltage current output | 15 V |
| Output current ranges | 0 mA ... +20 mA +4 mA ... +20 mA -20 mA ... +20 mA |
| Operational limit of current ranges | +/-0.3% ... +/-0.8% |
| Basic error limit current ranges | +/-0.2% ... +/-0.5% |
| Destruction limit against external applied voltage | max. 30V |
| Settling time for ohmic load | 0.5 ms |
| Settling time for capacitive load | 1 ms |
| Settling time for inductive load | 1 ms |
| Resolution in bit | 12 |
| Conversion time | 1.2 ms / channel |
| Substitute value can be applied | yes |
| Output data size | 4 Byte |
Status information, alarms, diagnostics |
|
| Status display | none |
| Interrupts | yes |
| Process alarm | no |
| Diagnostic interrupt | yes, parameterizable |
| Diagnostic functions | yes |
| Diagnostics information read-out | possible |
| Supply voltage display | green LED |
| Group error display | red SF LED |
| Channel error display | none |
Isolation |
|
| Between channels | - |
| Between channels of groups to | - |
| Between channels and backplane bus | |
| Between channels and power supply | |
| Max. potential difference between circuits | - |
| Max. potential difference between inputs (Ucm) | DC 11 V |
| Max. potential difference between Mana and Mintern (Uiso) | DC 75 V/ AC 50 V |
| Max. potential difference between inputs and Mana (Ucm) | DC 11 V |
| Max. potential difference between inputs and Mintern (Uiso) | DC 75 V/ AC 50 V |
| Max. potential difference between Mintern and outputs | - |
| Insulation tested with | DC 500 V |
Datasizes |
|
| Input bytes | 8 |
| Output bytes | 4 |
| Parameter bytes | 18 |
| Diagnostic bytes | 12 |
Housing | |
| Material | PPE / PA 6.6 |
| Mounting | Profile rail 35 mm |
Mechanical data |
|
| Dimensions (WxHxD) | 101.6 mm x 76 mm x 48 mm |
| Net weight | 230 g |
| Weight including accessories | - |
| Gross weight | - |
Environmental conditions | |
| Operating temperature | 0 °C to 60 °C |
| Storage temperature | -25 °C to 70 °C |
Certifications |
|
| UL certification | yes |
| KC certification | - |