Skip to main content
  • SLIO

053-1DN00 - Interface modules | Fieldbus slave modules without I/Os

Order no.

053-1DN00

TypeIM 053DN
Module ID-

General information

Note-
FeaturesGroup 2 only Device
Poll only Device
Baud rate: 125, 250 and 500 Kbit/s
Up to 64 peripheral modules

Technical data power supply

Power supply (rated value)DC 24 V
Power supply (permitted range)DC 20.4...28.8 V
Reverse polarity protection
Current consumption (no-load operation)90 mA
Current consumption (rated value)0.95 A
Inrush current3.9 A
I²t0.14 A²s
Max. current drain at backplane bus3 A
Max. current drain load supply10 A
Power loss3 W

Status information, alarms, diagnostics

Status displayyes
Interrupts-
Process alarm-
Diagnostic interrupt-
Diagnostic functions-
Diagnostics information read-outpossible
Supply voltage displaygreen LED
Service Indicator-
Group error displayred SF LED
Channel error displaynone

Hardware configuration

Racks, max.1
Modules per rack, max.64
Number of digital modules, max.64
Number of analog modules, max.64

Communication

FieldbusDeviceNet
Type of interfaceCAN
Connector5-pin Open Style Connector
TopologyLinear bus with bus termination at both ends
Electrically isolated
Number of participants, max.64
Node addresses0 - 63
Transmission speed, min.125 kbit/s
Transmission speed, max.500 kbit/s
Address range inputs, max.256 Byte
Address range outputs, max.256 Byte
Number of TxPDOs, max.-
Number of RxPDOs, max.-

Functionality MECHATROLINK-III slave

Supported profile-
Supported transfer cycle-
Cyclic data size per node-
Max. Number of nodes-
Supported communication method-
Supported command "Cyclic"-
Supported command "Event driven"-
Supported command "Message"-

Datasizes

Input bytes-
Output bytes-
Parameter bytes-
Diagnostic bytes-

Housing

MaterialPPE / PPE GF10
MountingProfile rail 35 mm

Mechanical data

Dimensions (WxHxD)48.5 mm x 109 mm x 76.5 mm
Net weight152.5 g
Weight including accessories160 g
Gross weight177.5 g

Environmental conditions

Operating temperature0 °C to 60 °C
Storage temperature-25 °C to 70 °C

Certifications

UL certificationyes
KC certificationyes

Downloads

[Datasheet]
[Manual]

[STP]