-
SLIO
053-1DP00 - Interface modules | Fieldbus slave modules without I/Os
Order no. |
053-1DP00 |
| Type | IM 053DP |
| Module ID | - |
General information | |
| Note | - |
| Features | DP-V0, DP-V1 244 byte input and 244 byte output data 244 byte parameter data Various diagnostics functions Integrated DC 24V power supply for power and electronic section supply of the periphery modules Status LEDs Up to 64 peripheral modules |
Technical data power supply |
|
| Power supply (rated value) | DC 24 V |
| Power supply (permitted range) | DC 20.4...28.8 V |
| Reverse polarity protection |  |
| Current consumption (no-load operation) | 90 mA |
| Current consumption (rated value) | 0.95 A |
| Inrush current | 3.9 A |
| I²t | 0.14 A²s |
| Max. current drain at backplane bus | 3 A |
| Max. current drain load supply | 10 A |
| Power loss | 3 W |
Status information, alarms, diagnostics | |
| Status display | yes |
| Interrupts | yes, parameterizable |
| Process alarm | yes, parameterizable |
| Diagnostic interrupt | yes, parameterizable |
| Diagnostic functions | yes, parameterizable |
| Diagnostics information read-out | possible |
| Supply voltage display | green LED |
| Service Indicator | - |
| Group error display | red LED |
| Channel error display | none |
Hardware configuration |
|
| Racks, max. | 1 |
| Modules per rack, max. | 64 |
| Number of digital modules, max. | 64 |
| Number of analog modules, max. | 64 |
Communication | |
| Fieldbus | PROFIBUS-DP to EN 50170 |
| Type of interface | RS485 isolated |
| Connector | Sub-D, 9-pin, female |
| Topology | Linear bus with bus termination at both ends |
| Electrically isolated | |
| Number of participants, max. | 125 |
| Node addresses | 1 - 125 |
| Transmission speed, min. | 9.6 kbit/s |
| Transmission speed, max. | 12 Mbit/s |
| Address range inputs, max. | 244 Byte |
| Address range outputs, max. | 244 Byte |
| Number of TxPDOs, max. | - |
| Number of RxPDOs, max. | - |
Functionality MECHATROLINK-III slave | |
| Supported profile | - |
| Supported transfer cycle | - |
| Cyclic data size per node | - |
| Max. Number of nodes | - |
| Supported communication method | - |
| Supported command "Cyclic" | - |
| Supported command "Event driven" | - |
| Supported command "Message" | - |
Datasizes |
|
| Input bytes | - |
| Output bytes | - |
| Parameter bytes | - |
| Diagnostic bytes | - |
Housing | |
| Material | PPE / PPE GF10 |
| Mounting | Profile rail 35 mm |
Mechanical data |
|
| Dimensions (WxHxD) | 48.5 mm x 109 mm x 76.5 mm |
| Net weight | 160 g |
| Weight including accessories | 160 g |
| Gross weight | 177.5 g |
Environmental conditions | |
| Operating temperature | 0 °C to 60 °C |
| Storage temperature | -25 °C to 70 °C |
Certifications |
|
| UL certification | yes |
| KC certification | yes |
