Skip to main content
  • SLIO

060-1AA00 - Interface modules | Line extensions

Order no.


TypeIM 060, Line extension master
Module ID8080 8080

General information

FeaturesExtension to another line
Connector: 1x RJ45 plug connector
Module width 25,8 mm
Connection: CAT6 cable
Maximum length: 2 m
Module is always installed at the last place in the line
Module IM060 and IM061 always form a pair

Technical data power supply

Power supply (rated value)DC 5 V
Power supply (permitted range)-
Reverse polarity protection-
Current consumption (no-load operation)50 mA
Current consumption (rated value)-
Inrush current-
Max. current drain at backplane bus-
Max. current drain load supply-
Power loss0.25 W

Status information, alarms, diagnostics

Status displayyes
Process alarmno
Diagnostic interruptno
Diagnostic functionsno
Diagnostics information read-outnone
Supply voltage displayyes
Service Indicatornone
Group error displayyes
Channel error displaynone

Hardware configuration

Racks, max.4
Modules per rack, max. 64 minus number line extensions
Number of digital modules, max.-
Number of analog modules, max.-


Type of interface-
Electrically isolated-
Number of participants, max.-
Node addresses-
Transmission speed, min.-
Transmission speed, max.-
Address range inputs, max.-
Address range outputs, max.-
Number of TxPDOs, max.-
Number of RxPDOs, max.-


MaterialPPE / PPE GF10
MountingProfile rail 35 mm

Mechanical data

Dimensions (WxHxD)25.8 mm x 109 mm x 76.5 mm
Net weight53 g
Weight including accessories53 g
Gross weight68 g

Environmental conditions

Operating temperature0 °C to 60 °C
Storage temperature-25 °C to 70 °C


UL certificationyes
KC certificationyes