Skip to main content
  • SLIO

061-1BA00 - Interface modules | Line extensions

Order no.

061-1BA00

TypeIM 061, Line extension slave
Module ID-

General information

Note-
FeaturesExtension up to 8 additional lines (up to 64 modules)
Connector: 1x RJ45 plug connector
Module width 48.5 mm
Connection: CAT6 cable
Maximum length: 2 m
Module is always installed at the first place in the line
Module IM060 and IM061 always form a pair

Technical data power supply

Power supply (rated value)DC 24 V
Power supply (permitted range)DC 20.4...28.8 V
Reverse polarity protection
Current consumption (no-load operation)10 mA
Current consumption (rated value)0.95 A
Inrush current3.9 A
I²t0.14 A²s
Max. current drain at backplane bus2 A
Max. current drain load supply10 A
Power loss1.4 W

Status information, alarms, diagnostics

Status displayyes
Interruptsno
Process alarmno
Diagnostic interruptno
Diagnostic functionsno
Diagnostics information read-outnone
Supply voltage displayyes
Service Indicatornone
Group error displayyes
Channel error displaynone

Hardware configuration

Racks, max.4
Modules per rack, max.total max. 64 minus number line extensions
Number of digital modules, max.-
Number of analog modules, max.-

Communication

FieldbusSLIO
Type of interface-
ConnectorRJ45
Topology-
Electrically isolated-
Number of participants, max.-
Node addresses-
Transmission speed, min.-
Transmission speed, max.-
Address range inputs, max.-
Address range outputs, max.-
Number of TxPDOs, max.-
Number of RxPDOs, max.-

Housing

MaterialPPE / PPE GF10
MountingProfile rail 35 mm

Mechanical data

Dimensions (WxHxD)48.5 mm x 109 mm x 76.5 mm
Net weight155 g
Weight including accessories155 g
Gross weight172.5 g

Environmental conditions

Operating temperature0 °C to 60 °C
Storage temperature-25 °C to 70 °C

Certifications

UL certificationyes
KC certificationyes

Downloads

[Datasheet]
[Manual]